English
简体中文
Pусский
This machine is mainly suitable for the assembly of coin cells. It realizes full-process assembly of coin cell assembly, including positive and negative electrode materials, separator, gasket, electrolyte, weighing, and various other materials. The battery assembly is completed inside a glovebox with a sealed environment, offering good processability for the battery. It mainly consists of a tray feeding mechanism, a robotic loading mechanism, a sealing module mechanism, an electrolyte injection pump, a glovebox, etc. The feeding adopts a disc-type channel design, which can meet the requirements for efficient assembly of various coin cells. The equipment is configured for 10 different electrolytes, automatically twists open and closes bottle caps, automatically draws electrolyte from different bottles, and reserves two bottles for automatic cleaning — one for cleaning solution and one for waste liquid collection.
Every stage of machine motion is equipped with a signal detection and acquisition system, which continuously transmits operating status to the central control center to ensure coordinated movement of all components and prevent erroneous actions.
Interlock protection is implemented for actions in both automatic mode and manual mode.
In the event of a fault, an alarm is automatically triggered and the equipment is automatically paused; after clearing the alarm, operation can continue.
Insulation protection treatment has been applied to isolate the connections of the high-voltage section.
Devices for electrostatic protection, leakage protection, short-circuit protection, and overvoltage protection are installed.
Equipped with an audible alarm notification function.
Name | Parameters | Remarks |
Incoming Materials | Top case | Manually placed into fixture, full tray loaded each time |
Anode | Full tray loaded each time | |
Separator | Full tray loaded each time | |
Cathode | Full tray loaded each time | |
Filling 1 | Automatic electrolyte injection | |
Flat gasket | Manually placed into fixture, full tray loaded each time | |
Battery Model | 2025, 2032 | |
Electrolyte Injection Pump Precision | 0.1–0.5 mL; injection precision of the pump itself: ±5 μL | |
Electrolyte Injection Option | Two injections (configurable) | |
Coin Cells Assembled per Batch | 64 cells/batch | |
Coin Cells Assembled per Hour | 50 cells/hour | |
Equipment Gas Supply | 0.5–0.8 MPa argon or nitrogen (inside glovebox), or 0.5–0.8 MPa compressed air | 1. When the equipment is placed inside a glovebox, inert gas (argon, nitrogen) must be used. 2. When the equipment is placed in a dry room, conventional gas supply / dry gas may be used. |
Equipment Power Supply | AC220V/50Hz (AC110V/60Hz) | Customer-supplied |
Power | Approx. 5 KW | |
Vacuum Source | Customer-supplied |
Leave Message
Please share your details for prompt assistance.
