Battery internal resistance tester

Equipment application:The instrument used to measure the internal impedance of the battery and the degree of damage to the acidified film of the battery is to apply a 1KHz AC signal to the measured object and obtain its internal resistance by measuring its AC voltage drop.The internal resistance val

17 people are viewing this right now

Equipment application:

The instrument used to measure the internal impedance of the battery and the degree of damage to the acidified film of the battery is to apply a 1KHz AC signal to the measured object and obtain its internal resistance by measuring its AC voltage drop.

The internal resistance value is used to judge the deterioration state of the battery. Generally speaking, the smaller the resistance value, the better the battery performance.

Machine parameters:
Power supply: AC220V, 50HZ, power consumption ≤20W
Dimensions (W×D×H): 340×365×110 mm
Test environment: Temperature: 20℃±5℃, relative humidity ≤85%

Equipment performance:


BK-300ABK-600A
test typeAC resistance testAC resistance test
testing methodFour-wire measurement

Four-wire measurement

AC current frequency1KHZ±0.1KHZ1KHZ±0.1KHZ
Voltage measurementTwo-way DC 0~ 1.999V
, resolution 1 mV, accuracy ±(0.2%RD+0.1%FS)
DC 2~19.99V, resolution 10 mV, accuracy ±(0.2%RD+0.1%FS)
Two -way
DC 0~6.0000V, resolution 0.1 mV, accuracy ±0.01%RD±3dgt
DC 6~60.000V, resolution 1 mV,
 accuracy ±0.01%RD±3dgt
Internal resistance measurementTwo-stage
1 mΩ~199.9mΩ, resolution 0.1mΩ, accuracy ±(0.3%RD +0.5 mΩ)
200 mΩ~1999mΩ, resolution 1mΩ, accuracy ±(0.3%RD +2 mΩ)
Divided into three levels
Low range: 0~33.000mΩ Test current 100mA ±0.2%RD±5dgt
Middle range: 0~330.00mΩ Test current 10mA ±0.2%RD±5dgt
High range: 0~3300.0mΩ Test current 1mA ±0.2% RD ±5dgt
test alarmInternal resistance unqualified alarmInternal resistance voltage unqualified alarm
Fixture formAviation plug, can be connected to fixture box or test wireAviation plug, can be connected to fixture box or test wire


You May Also Like